CAMO Hidden Deck Fasteners

CAMO Edge Hidden Deck Fasteners

Key Takeaways

Invisible Finish: Achieve a clean, fastener-free deck surface by driving screws into the board edges.
Universal Compatibility: Works with pressure-treated lumber, cedar, redwood, and most PVC or composite square-edge boards.
System Driven: Best used with CAMO Marksman jigs or the CAMO Drive tool for consistent spacing and speed.
Canadian Proven: Engineered to withstand harsh seasonal shifts without backing out or rusting.

What This Product Is

CAMO Edge fasteners are the core of the CAMO hidden deck fastening system. Unlike traditional face-screwing, these specialized screws are driven at an angle into the side of the deck board, leaving the top surface completely smooth and free of visible screw heads or "mushrooming."

Clean Aesthetics: Eliminates the look of cluttered screw lines across your deck.
Secure Attachment: Provides a strong, structural connection directly to the joist.
Protective Design: The rake tip augers material out, reducing the risk of board splitting.

Where CAMO Edge Fasteners Work Best

This system is highly versatile but performs best in specific applications. Use CAMO Edge fasteners for:

Square-Edge Boards: The ideal choice for boards without side grooves.
Wood Decking: Excellent for Pressure-Treated, Cedar, Ipe, and Redwood.
Composite & PVC: Compatible with most leading brands (check manufacturer spacing requirements).
Residential & Commercial: Perfect for any project where barefoot safety and a premium look are priorities.

Note: For grooved-edge boards, you may prefer CAMO Universal Deck Clips. Not sure which one fits your board profile? See our comparison guide below.

Tools You’ll Need for CAMO Edge

CAMO Edge is a system, not just a fastener. To ensure a professional installation and proper 3/16" or 1/16" spacing, you will need one of the following:

CAMO Marksman Pro Jigs: Handheld tools that position the screws perfectly every time.
CAMO Drive Tool: A stand-up attachment for your drill that allows for 5x faster installation using collated Edge screws.
CAMO Driver Bits: Included in most packs, these bits feature a built-in shoulder to prevent over-driving.

Installation Snapshot: How It Works

Installing CAMO Edge is straightforward, reducing labor time compared to traditional hidden clips:

Set the Jig: Place your Marksman tool or CAMO Drive over the deck board aligned with the joist.
Load & Drive: Drop a CAMO Edge screw into the guide and drive until the bit shoulder hits the guide.
Repeat: Move to the next joist. The jig automatically sets your board spacing as you go.

Not Sure If CAMO Is Right for Your Deck?

Choosing the right hidden fastener is critical for both the look of your deck and the validity of your board warranty. CAMO is a fantastic "side-entry" system, but it isn't the only option.

Before you buy, we recommend reading our expert analysis on The Deck Store. We break down the differences between side-entry screws, face-plugging systems, and hidden clips.

Read our CAMO vs. Cortex vs. Clips Comparison on DeckStore.ca

Learn about installation speeds, aesthetic differences, and which system provides the best long-term value for your specific decking material.