CUTEK® Extreme Wood Protection Oil

CUTEK® Extreme Wood Protection Oil: High-Performance Wood Stabilizer

CUTEK® Extreme Wood Protection Oil is a synthetic, oil-based wood stabilizer designed to penetrate deep into the wood grain. Unlike traditional stains that form a film on the surface, CUTEK® lives inside the wood fibers to control moisture movement—the primary cause of warping, cupping, and splitting. Engineered for the extreme Canadian climate, it provides long-term protection that will never peel, flake, or crack.

Why Choose CUTEK® Extreme

• Deep Penetration & Protection
  Migrates deep into the wood to protect against rot and moisture from the inside out.
• No Stripping or Sanding
  Maintenance is a simple "clean and recoat." You will never need to strip or sand your deck again.
• Active Self-Healing
  The oil remains mobile inside the timber, constantly migrating to seal new cracks and checks as they appear over time.
• Climate-Tested Reliability
  Specifically engineered to withstand extreme freeze-thaw cycles and high UV exposure.
• Versatile Application
  Suitable for all wood species: Ipe, Cedar, Pine, Tigerwood, and Thermally Modified Wood.

🛠️ Application & The 3-Step System

1. PREPARE (Clean/Restore)
   Use CUTEK® Wood Reviver to remove silvering, mold, and mill glaze. Proper prep ensures maximum absorption.
2. PROTECT (The Oil)
   Apply CUTEK® Extreme Wood Protection Oil. Use it Clear for a natural silvering effect, or add a CUTEK® Colourtone to maintain specific wood tones and enhance UV protection.
3. MAINTAIN (The Long-Term Fix)
   When the wood begins to look dull, simply clean and apply a fresh coat. No heavy equipment required.

📊 Coverage Guide

• Hardwood or New Wood: 600 – 800 sq. ft. per gallon.
• Standard Coverage: 400 – 600 sq. ft. per gallon.
• Rough-Sawn or Old Wood: 300 – 500 sq. ft. per gallon.

🛡️ Important Notes

• 📍 PICKUP ONLY: Available for pickup from The Deck Store showroom locations (Toronto, Oakville, Mississauga, Oshawa, and Ottawa).
• ⚠️ Note: Check the forecast! Ensure no rain is expected for at least 24–48 hours after application.
• 🔗 Resources: View the CUTEK® Extreme Fact Sheet.